Waste Oil Heaters
We have an extensive range of models and solutions for all of your heating requirements. For more detailed information click one of the links below.
Our Heating Range - Quick Preview
The OWH-75
KW'S/HR INPUT 21.98
KW'S/HR OUTPUT 17.58
LITRES PER HOUR 1.89
VOLTAGE REQUIREMENTS 115
AMPS FULL LOAD with Pump 10.5
FAN MOTOR HP 1/10
FAN MOTOR RPM 1625
FAN DIA/PITCH 14/23
CFM W/ DUCTWORK PER 100 FT N/A
EFFECTIVE AIR FLOW 50 FT
FLUE SIZE 6"
WEIGHT W/ BURNER 58.97KG
SHIPPING WEIGHT 68.04KG
DIMENSIONS L/W/H 1207 / 559 / 712 MM
SHIPPING DIMENSIONS L/W/H 1220/572/712MM
Optional: Bi-Directional Heat Throw Capability (Learn More) N/A
​
Longevity
Every OMNI waste oil heater is built with high grade stainless steel, and is backed with a with a 15 year warranty to match (longest in the industry). From the Floating Crimped Heater Exchangers, to the Patented Flame Control System, our waste oil heaters will provide you with long lasting ROI.
​
Low Maintenance
You will find our Flame Control System cuts out much of the time consuming and costly maintenance incurred with many other waste oil heaters. By precisely controlling the temperature of the waste oil before ignition, the OMNI will not only burn much more consistently, but is completely free of carbon build up which clogs the block. For the small amount of heater maintenance needed, there is a guide on the easy access burner panel to help you through. We would rather make it easy for you to clean yourself than be charged for costly service calls.
​
High Output
With tuned axial fans and the large vent area design, OMNI Waste Oil Heaters have the highest warm air output, most CFM's and quickest recovery times in the industry. This means less waste oil burnt, less run-time, less electricity used, and less wear and tear on the equipment for an overall better experience.